Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
REAR STABILIZER BAR BUSH |
48818 |
- |
- |
|
2 |
REAR NO. 1 STABILIZER BAR BRACKET |
48832A |
- |
- |
|
*A |
for Gasoline Model |
- |
- |
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
3 |
REAR STABILIZER BAR |
48812 |
- |
- |
|
4 |
STABILIZE SUSPENSION |
- |
- |
- |
|
5 |
REAR STABILIZER LINK ASSEMBLY LH |
48840A |
- |
- |
|
6 |
REAR STABILIZER LINK ASSEMBLY RH |
48830D |
- |
- |
|
7 |
REAR WHEEL |
- |
- |
- |
- |
*A |
for Gasoline Model |
*B |
for HEV Model |
*1 |
CAP |
- |
- |
![]() |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) |
- |
- |
PROCEDURE
1. INSTALL REAR STABILIZER BAR BUSH (for Gasoline Model)
![]() |
NOTICE: Be sure to install the rear stabilizer bushings so that each cutout faces the front of the vehicle. |
2. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for Gasoline Model)
*a |
Arrow Mark |
- |
- |
![]() |
Top of the Vehicle |
- |
- |
(1) Install the 2 rear No. 1 stabilizer bar brackets to the 2 rear stabilizer bushings.
NOTICE:
Be sure to install the rear No. 1 stabilizer bar brackets so that each arrow mark faces the top of the vehicle.
3. INSTALL REAR STABILIZER BAR
(a) for Gasoline Model:
*a |
Identification Mark |
- |
- |
(1) Install the rear stabilizer bar to the rear suspension member sub-assembly with the 4 bolts.
Torque:
78 N·m {795 kgf·cm, 58 ft·lbf}
NOTICE:
- Ensure that the identification mark faces the right side of the vehicle.
- Temporarily tighten bolt (A) and then fully tighten the 2 bolts in the order of (B) and (A).
(b) for HEV Model:
*a |
Identification Mark |
*b |
Temporarily Tighten |
(1) Install the rear stabilizer bar to the rear suspension member sub-assembly with the 4 bolts in the order shown in the illustration.
Torque:
78 N·m {795 kgf·cm, 58 ft·lbf}
NOTICE:
Ensure that the identification mark faces the right side of the vehicle.
4. STABILIZE SUSPENSION
Click here ![]()
5. INSTALL REAR STABILIZER LINK ASSEMBLY LH
(1) Install the rear stabilizer link assembly LH with the nut (A).
Torque:
75 N·m {765 kgf·cm, 55 ft·lbf}
(2) If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.
(3) Install the rear stabilizer link assembly LH with the bolt and nut (B).
Torque:
75 N·m {765 kgf·cm, 55 ft·lbf}
NOTICE:
Tighten the nut with the bolt secured.
(4) Install the cap.
6. INSTALL REAR STABILIZER LINK ASSEMBLY RH
7. INSTALL REAR WHEEL
Click here ![]()
.png)
.png)
.png)
.gif)
.png)
.png)