Suspension

Removal

~1min read

REMOVAL

COMPONENTS (REOVAL)

Procedure

Part Name Code

1

REAR WHEEL

-

-

-

-

2

REAR STABILIZER LINK ASSEMBLY LH

48840A

-

-

3

REAR STABILIZER LINK ASSEMBLY RH

48830D

-

-

4

REAR STABILIZER BAR

48812

-

-

-

*A

for Gasoline Model

*B

for HEV Model

*1

CAP

-

-

Procedure

Part Name Code

5

REAR NO. 1 STABILIZER BAR BRACKET

48832A

-

-

-

6

REAR STABILIZER BAR BUSH

48818

-

-

-

*A

for Gasoline Model

-

-

PROCEDURE

1. REMOVE REAR WHEEL

Click here

2. REMOVE REAR STABILIZER LINK ASSEMBLY LH

*a

Wooden Block

*b

Jack

(1) Remove the cap.

(2) Loosen the nut (A) of the rear stabilizer link assembly LH.

(3) If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.

(4) Loosen the nut (B) of the rear stabilizer link assembly LH.

(5) Using a jack and a wooden block, support the rear No. 2 suspension arm assembly.

NOTICE:

  • When jacking up the rear No. 2 suspension arm assembly, be sure to jack it up slowly.
  • Make sure to perform this operation with the vehicle kept as low as possible.

(6) Remove the bolt, 2 nuts and rear stabilizer link assembly LH.

3. REMOVE REAR STABILIZER LINK ASSEMBLY RH

(a) Perform the same procedure as for the LH side.

4. REMOVE REAR STABILIZER BAR

(a) for Gasoline Model:

(b) for HEV Model:

5. REMOVE REAR NO. 1 STABILIZER BAR BRACKET (for Gasoline Model)

6. REMOVE REAR STABILIZER BAR BUSH (for Gasoline Model)