Suspension

Rear Lower Arm

~1min read

READ NEXT:

Removal

REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL) Procedure Part Name Code 1 REAR WHEEL - -

Installation

INSTALLATION CAUTION / NOTICE / HINT Procedure Part Name Code 1 TEMPORARILY TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY

Rear Shock Absorber (for 2wd)

SEE MORE:

Lost Communication with Brake System Control Module Missing Message (U012987,U014087,U015587,U111787)

DESCRIPTION These DTCs are stored when there is a CAN communication malfunction between the certification ECU (smart key ECU assembly), skid control ECU (brake actuator assembly), ECM, main body ECU (multiplex network body ECU) or combination meter assembly, and data from the option connector (bus b

Brake Switch "A"/"B" Signal Cross Coupled (P05042B)

DESCRIPTION The stop light switch assembly is a duplex system that transmits two signals: STP and ST1-. These two signals are used by the ECM to monitor whether or not the brake system is working properly. If the signals, which indicate the brake pedal is being depressed and released, are detected s