Installation
INSTALLATION
PROCEDURE
1. INSTALL PIPING CLAMP (for Suction Hose Sub-assembly)
(a) for Gasoline Model:
(1) Remove the vinyl tape from the suction pipe sub-assembly and suction hose sub-assembly.
(2) Install a new piping clamp to the suction hose sub-assembly. NOTICE:
|
|
(3) Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the suction hose sub-assembly.
Compressor Oil:
ND-OIL 12 or equivalent
(4) Install the 2 O-rings to the suction hose sub-assembly.
NOTICE:
Keep the O-rings and O-ring fitting surfaces free from dirt and foreign matter.
(5) Align the alignment marks and connect the suction pipe sub-assembly and suction hose sub-assembly. NOTICE: Connect the parts by holding the tubes, not the piping clamp. |
|
(6) Securely insert the piping clamp to the point where the large diameter section of the piping clamp is covered by the suction pipe sub-assembly. NOTICE:
|
|
(b) for HEV Model:
(1) Remove the vinyl tape from the No. 2 air conditioning tube and accessory assembly and suction hose sub-assembly.
(2) Install a new piping clamp to the suction hose sub-assembly. NOTICE:
|
|
(3) Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the suction hose sub-assembly.
Compressor Oil:
ND-OIL 11 or equivalent
(4) Install the 2 O-rings to the suction hose sub-assembly.
NOTICE:
Keep the O-rings and O-ring fitting surfaces free from dirt and foreign matter.
(5) Align the alignment marks and connect the No. 2 air conditioning tube and accessory assembly and suction hose sub-assembly. NOTICE: Connect the parts by holding the tubes, not the piping clamp. |
|
(6) Securely insert the piping clamp to the point where the large diameter section of the piping clamp is covered by the No. 2 air conditioning tube and accessory assembly. NOTICE:
|
|
2. INSTALL PIPING CLAMP (for Air Conditioning Tube and Accessory Assembly)
Click here ![]()
3. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
Click here ![]()
4. WARM UP ENGINE (for Gasoline Model)
Click here ![]()
5. WARM UP COMPRESSOR (for HEV Model)
Click here ![]()
6. INSPECT FOR REFRIGERANT LEAK
Click here ![]()


