Removal
REMOVAL
COMPONENTS (REMOVAL)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
CAM TIMING OIL CONTROL SOLENOID ASSEMBLY |
15370 |
- |
- |
|
2 |
O-RING |
- |
- |
- |
|
● |
Non-reusable part |
★ |
Precoated part |
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here ![]()
PROCEDURE
1. REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY
(1) Disconnect the cam timing oil control solenoid assembly connector.
(2) Using an 8 mm socket wrench, remove the 2 bolts and cam timing oil control solenoid assembly from the No. 2 timing chain cover assembly.
NOTICE:
If the cam timing oil control solenoid assembly has been struck or dropped, replace it.
2. REMOVE O-RING
![]() |
HINT: Perform this procedure only when replacement of the O-ring is necessary. |
(1) Remove the O-ring from the cam timing oil control solenoid assembly.
NOTICE:
- When removing the O-ring, be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly.
- If the O-ring groove of the cam timing oil control solenoid assembly is damaged, replace the cam timing oil control solenoid assembly with a new one.

.png)
.png)
.gif)
.png)