Replacement
REPLACEMENT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the diaphragm oil seal removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/ReplacedReplacement Part or Procedure | Necessary Procedures | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |
|---|---|---|---|
Rear wheel alignment adjustment |
|
|
|
Reset memory |
Dynamic torque control AWD system |
||
Suspension, tires, etc. |
Rear television camera assembly optical axis (Back camera position setting) |
Parking assist monitor system |
|
Initialize headlight ECU sub-assembly LH |
Automatic headlight beam level control system |
PROCEDURE
1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY
Click here ![]()
2. REMOVE NO. 7 FLOOR WIRE
Click here ![]()
3. REMOVE REAR NO. 1 DIFFERENTIAL SUPPORT
Click here ![]()
4. REMOVE REAR NO. 2 DIFFERENTIAL SUPPORT
Click here ![]()
5. REMOVE TRANSMISSION COUPLING ASSEMBLY
Click here ![]()
6. REMOVE TRANSMISSION COUPLING CONICAL SPRING WASHER
Click here ![]()
7. REMOVE TRANSMISSION COUPLING SHIM
Click here ![]()
8. REMOVE DIAPHRAGM OIL SEAL
(a) Using SST, remove the diaphragm oil seal from the rear differential carrier assembly. SST: 09308-10010 |
|
9. INSTALL DIAPHRAGM OIL SEAL
(a) Coat the lip of a new diaphragm oil seal with MP grease.
(b) Using SST and a hammer, tap the diaphragm oil seal into the rear differential carrier assembly until it reaches the standard value. SST: 09710-30021 09710-03121 SST: 09950-60011 09951-00570 SST: 09950-70010 09951-07100 Standard depth (A): 6.5 to 7.5 mm (0.256 to 0.295 in.) (from the edge of the rear differential carrier assembly) NOTICE:
|
![]() |
10. INSTALL TRANSMISSION COUPLING SHIM
Click here ![]()
11. INSTALL TRANSMISSION COUPLING CONICAL SPRING WASHER
Click here ![]()
12. INSTALL TRANSMISSION COUPLING ASSEMBLY
Click here ![]()
13. INSTALL REAR NO. 1 DIFFERENTIAL SUPPORT
Click here ![]()
14. INSTALL REAR NO. 2 DIFFERENTIAL SUPPORT
Click here ![]()
15. INSTALL NO. 7 FLOOR WIRE
16. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY
Click here ![]()
.gif)

