Engine & Hybrid System

Utility

~2min read

UTILITY

PURPOSE

Utility Items

(GTS Display)

Main Purpose

Control Description

All Readiness

Check whether or not DTC judgment has been completed.

-

Check Mode

This item is displayed on the GTS but is not used.

-

Diagnosis Related Information

Confirm the diagnosis related information

-

Vehicle Control History (RoB)

View vehicle control history.

Inspection Mode

Enter Inspection Mode.

ALL READINESS

HINT:

  • With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.
  • You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.

(a) Clear the DTCs even if no DTCs are stored.

Powertrain > Hybrid Control > Clear DTCs

(b) Turn the ignition switch off and wait for 2 minutes or more.

(c) Turn the ignition switch to ON.

(d) Perform the DTC judgment driving pattern to run the DTC judgment.

Powertrain > Hybrid Control > Utility

All Readiness

(e) Input the DTC to be confirmed.

(f) Check the DTC judgment result.

GTS Display

Description

If the judgment result shows INCOMPLETE, perform the DTC confirmation driving pattern again.

NORMAL

  • DTC judgment completed
  • System normal

ABNORMAL

  • DTC judgment completed
  • System abnormal

INCOMPLETE

  • DTC judgment not completed
  • Perform the driving pattern

(g) Turn the ignition switch off.

DIAGNOSIS RELATED INFORMATION

(a) Check for diagnosis related information.

(1) Check for diagnosis related information.

Powertrain > Hybrid Control > Utility

Diagnosis Related Information

(2) Check the Diagnosis Related Information, and then write them down.

(b) Clear diagnosis related information.

(1) Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

(2) Clear the diagnosis related information and Freeze Frame Data.

(3) Turn the ignition switch off.