Diagnostics
Diagnostic trouble code chart
In this manual: Diagnostics
3steps
~18min
2/5difficulty
Done 0 of 3
| Terms | Terms |
| Physical address | Three–digit code (shown in hexadecimal) which is given to each component comprising the avc–lan. Corresponding to the function, individual symbols are specified. |
| Logical address | Two–digit code (shown in hexadecimal) which is given to each function comprising the inner system of the avc–lan. |
: *1: even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
*2: It is stored when 180 sec. Has passed after the power supply connector is pulled out after engine start.
*3: It may be stored when the engine key is turned 1 min. After engine start.
*4: It may be stored when the engine key is turned again after engine start.
*5: When 210 sec. Has passed after pulling out the power supply connector of the master component with the ignition switch in acc or on, this code is stored.
- Logical address: 01 (communication control)


- Logical address: 61 (cassette switch)

- Logical address: 62 (cd player)


Test yourself
A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?