Diagnostics
Inspection procedure
In this manual: Diagnostics
8steps
~48min
2/5difficulty
Done 0 of 8
1 Inspect fuse(stop)






5 Check harness and connector(between cruise control ecu assy and cruise control actuator assy)


Check and replace cruise control ecu assy

- Turn the ignition switch to off.
- remove the stop fuse from the instrument panel j/b.
- check continuity of the stop fuse.
Ok: continuity



- Disconnect the stop lamp switch assy connector.
- check continuity between each terminal of stop lamp switch assy.
Ok:




- Turn the ignition switch to off.
- disconnect the cruise control actuator assy connector.
- measure resistance between terminals 3 (l) and 4 (gnd) of the cruise control actuator assy.
Ok: resistance: 34.65 – 42.35 Ω



- Check continuity between the terminal 4 (gnd) of the cruise control actuator assy and body ground.
Ok: continuity


- Check for open and short circuit in harness and connector between cruise control ecu assy and cruise control actuator assy (actuator magnetic clutch)


Test yourself
A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?