Toyota Corolla Quiz
Audio & visual

Power point socket assy

In this manual: Audio & visual
Introduction — 31Preparation — 32Service specifications — 19Diagnostics — 497Engine control system — 6Fuel — 13Emission control — 28Exhaust — 3Cooling — 13Lubrication — 7Ignition — 3Starting & charging — 13Front suspension — 12Rear suspension — 9Tire & wheel — 1Drive shaft / propeller shaft — 15Brake — 42Automatic transmission / trans — 47Clutch — 19Steering column — 9Power steering — 11Heater & air conditioner — 20Supplemental restraint system — 27Seat belt — 12Lighting — 18Wiper & washer — 9Audio & visual — 12Wiring — 1Communication system — 1Windshield/windowglass/mirror — 31Seat — 10Theft deterrent & door lock — 10Sliding roof/convertible — 8Engine hood/door — 12Exterior/interior trim — 20Vehicle control system — 1Cruise control — 5Maintenance — 8
2steps
~12min
1/5difficulty
Done 0 of 2
Replacement Hint

: components:

 1. Remove floor shift shift lever knob sub–assy (m/t transaxle) 2. Remove console panel upper 3. Remove power point socket assy
Toyota Corolla. Remove power point socket assy
  1. Turn the socket in the circumference direction as shown the illustration, disengage the claw between the socket and the power point socket cover, and push out the socket to the room side.
  2. align the socket with the notch on the power point socket cover, remove the power point socket assy to the room side.
4. Install power point socket assy
  1. align the socket with the notch on the power point socket cover, push the power point socket assy into as hard as possible and install it.

Test yourself

A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.