Brake
Replacement
In this manual: Brake
~1min read
1. Remove console box sub–assy rear 2. Remove parking brake lever sub–assy 3. Remove exhaust pipe assy front 4. Remove front floor heat insulator no.1





- Remove the 3 nuts and front floor insulator no.1.

- Remove the 2 nuts and front floor insulator no.2.
- disconnect the parking brake cable assy no.1 From the equalizer and remove the parking brake cable assy no.1.
- connect the parking brake cable assy no.1 To the equalizer and install the parking brake cable assy no.1.

- Install the front floor insulator no.2 With the 2 nuts.
Torque: 5.5 Nvm (55 Kgf·cm, 48 in.Vlbf)

- Install the front floor insulator no.1 With the 3 nuts.
Torque: 5.5 Nvm (55 Kgf·cm, 48 in.Vlbf)
Test yourself
A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?