Automatic transmission / trans
Automatic transaxle fluid (ATM)
In this manual: Automatic transmission / trans
5steps
~30min
2/5difficulty
Done 0 of 5
ON-VEHICLE INSPECTION
1. CHECK FLUID LEVEL

HINT: Drive the vehicle so that the engine and transaxle are at normal operating temperature.
Fluid temperature: 70 - 80C (158 - 176F)
- Park the vehicle on a level surface and set the parking brake.
- With the engine idling and the brake pedal depressed, shift the shift lever into all positions from P to L position and return to P position.
- Pull out the dipstick and wipe it clean.
- Push it back fully into the pipe.
- Pull it out and check that the fluid level is in the HOT position.
If there are leaks, it is necessary to repair or replace O-rings, FIPGs, oil seals, plugs or other parts
Was this page helpful?