Automatic transmission / trans
Oil W/hose cooler ASSY (U151E/U151F)
In this manual: Automatic transmission / trans
~1min read
REPLACEMENT
1. REMOVE FRONT BUMPER COVER (SEE PAGE 76-2 )
2. DRAIN AUTOMATIC TRANSAXLE FLUID
(a) Remove the drain plug and gasket, and drain ATF.(b) Install a new gasket and the drain plug.
Torque: 49 NVm (500 kgfVcm, 36 ftVlbf)
3. REMOVE OIL COOLER ASSY

(a) Disconnect the 2 oil cooler hoses.
(b) Remove the bolt, nut and oil cooler assy.
4. INSTALL OIL COOLER ASSY

(a) Install the oil cooler assy, bolt A and nut B.
HINT: After temporarily tightening the bolt A, fully tighten in order of the nut B, bolt A.
Torque: 7.0 NVm (71 kgfVcm, 62 in.Vlbf)
(b) Connect the 2 oil cooler hoses.
5. INSTALL FRONT BUMPER COVER (SEE PAGE 76-2 )
6. ADD AUTOMATIC TRANSAXLE FLUID
7. INSPECT AUTOMATIC TRANSAXLE FLUID (SEE PAGE 40-2 )
Was this page helpful?