Automatic transmission / trans
Key inter lock solenoid (ATM)
In this manual: Automatic transmission / trans
~1min read
INSPECTION
1. INSPECT KEY INTER LOCK SOLENOID

(a) Disconnect the solenoid connector. (b) Connect KLS+ (4) terminal to the batteries' positive (+) terminal, and KLS- (3) terminal to the battery negative (-) terminal, and apply about 12V between KLS+ - KLS- terminals.
(c) Check that operation noise can be heard from the solenoid.
If the solenoid does not operate, replace the solenoid.
Was this page helpful?