Brake

Brake system

37steps
~222min
4/5difficulty
Done 0 of 37

PRECAUTION

NOTICE:

  • Care must be taken to replace each part properly as it could affect the performance of the brake system and result in a driving hazard. Replace the parts with parts having the same part number or equivalent.
  • It is very important to keep parts and the area clean when repairing the brake system.
  • If the vehicle is equipped with a mobile communication system, refer to the precaution in the INTRODUCTION section.

PROBLEM SYMPTOMS TABLE

HINT: Refer to the table below to help find the cause of the problem. The numbers indicate the priority of the possible cause of problem. Check each part in order. If necessary, replace these parts.

Symptom

Suspected Area

Low pedal or spongy pedal
  1. Fluid leaks in brake system
  2. Air in brake system
  3. Piston seals (Worn or damaged)
  4. Master cylinder (Faulty)
  5. Booster push rod (Out of adjustment
Brake drag
  1. Brake pedal free play (Minimal)
  2. Parking brake pedal travel (Out of adjustment)
  3. Parking brake wire (Sticking)
  4. Parking brake shoe clearance (Out of adjustment)
  5. Pad (Cracked or distorted)
  6. Piston (Stuck)
  7. Piston (Frozen)
  8. Booster push rod (Out of adjustment)
  9. Vacuum leaks in booster system
  10. Master cylinder (Faulty)
Brake pull
  1. Piston (Stuck)
  2. Pad (Oily)
  3. Piston (Frozen)
  4. Disc (Scored)
  5. Pad (Cracked or distorted)
Hard pedal but brake inefficient
  1. Fluid leaks in brake system
  2. Air in brake system
  3. Pad (Worn)
  4. Pad (Cracked or distorted)
  5. Pad (Oily)
  6. Pad (Glanzed)
  7. Disc (Scored)
  8. Booster push rod (Out of adjustment)
  9. Vacuum leaks in booster system
Brake noise
  1. Pad (Cracked or distorted)
  2. Installation bolt (Loose)
  3. Disc (Scored)
  4. Pad support plate (Loose)
  5. Sliding pin (Worn)
  6. Pad (Dirty)
  7. Pad (Glanzed)
  8. Anti-squeal shim (Damaged)