Brake

Speed sensor front LH

~1min read

REPLACEMENT

HINT:

  • Use the same procedures for the RH side and LH side.
  • The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL

2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSY LH

3. REMOVE SPEED SENSOR FRONT LH

REMOVE SPEED SENSOR FRONT LH

(a) Disconnect the speed sensor connector.

REMOVE SPEED SENSOR FRONT LH

(b) Remove the 2 bolts and the clamp from the body and the shock absorber assy.

REMOVE SPEED SENSOR FRONT LH

(c) Remove the bolt and the speed sensor front.

NOTICE: Prevent foreign matter from attaching to the sensor tip.

4. INSTALL SPEED SENSOR FRONT LH

 INSTALL SPEED SENSOR FRONT LH

(a) Install the speed sensor front with the bolt.

Torque: 8.0 NVm (82 kgfVcm, 71 in.Vlbf)

NOTICE: Prevent foreign matter from attaching to the sensor tip.

INSTALL SPEED SENSOR FRONT LH

(b) Install the speed sensor front with the 2 bolts and the clamp.

Torque: Bolt A: 5.0 NVm (51 kgfVcm, 44 in.Vlbf) Bolt B: 19 NVm (192 kgfVcm, 14 ftVlbf)

NOTICE: Do not twist the sensor wire when installing the sensor.

INSTALL SPEED SENSOR FRONT LH

(c) Connect the speed sensor connector.

5. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSY LH

6. INSTALL FRONT WHEEL

Torque: 103 NVm (1,050 kgfVcm, 76 ftVlbf)

7. CHECK ABS SPEED SENSOR SIGNAL (SEE PAGE 05-765 )