Toyota Land Cruiser Quiz
Brake

Disassembly

In this manual: Brake
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read

1. REMOVE CYLINDER BOOT SET RINGS AND CYLINDER BOOTS

REMOVE CYLINDER BOOT SET RINGS AND CYLINDER BOOTS

Using a screwdriver, remove the 4 cylinder boot set rings and 4 cylinder boots from the caliper.

2. REMOVE PISTONS FROM CYLINDER

REMOVE PISTONS FROM CYLINDER

(a) Prepare the wooden plate to hold the pistons.

REMOVE PISTONS FROM CYLINDER
(b) Place the plate between the pistons and insert a pad at one side.

(c) Use compressed air to remove the pistons alternately from the cylinder.

CAUTION: Do not place your fingers in front of the piston when using compressed air.

3. REMOVE PISTON SEALS FROM BRAKE CYLINDER

REMOVE PISTON SEALS FROM BRAKE CYLINDER

Using a screwdriver, remove the 4 piston seals from the cylinder.

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.