Installation

1. INSTALL GENERATOR

(a) Install the generator with the bolt and 2 nuts.

Torque: Bolt: 39 N·m Nut 10 mm: 39 N·m Nut 8 mm: 15,5 N·m

(b) Connect the generator connector.

(c) Connect the generator wire with the nut.

Torque: 9,8 N·m

(d) Install the terminal cap.

(e) Install the wire clamp to the cord clip on the generator.

2. INSTALL PS VANE PUMP PULLEY (SR-47 )

3. INSTALL RADIATOR ASSEMBLY (CO-19 )

4. INSTALL GENERATOR DRIVE BELT

Install the belt by turning the belt tensioner counterclockwise.

HINT: The pulley bolt for the belt tensioner has a left - hand thread.

5. FULL ENGINE COOLANT

6. START ENGINE AND CHECK FOR LEAKS

7. RECHECK ENGINE COOLANT LEVEL

8. PERFORM ON-VEHICLE INSPECTION

(CH-2 )

9. INSTALL ENGINE UNDER COVER NO.1