Power outlets

The power outlets can be used for a following component.

12 V: Accessories that run on less than 10 A 120 V AC: Accessories that use less than 100 W

• Front (12V)

• Rear (12V)

• Luggage compartment (120V AC)

• The power outlets can be used when

12V: The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.

120V:The “ENGINE START STOP” switch is in IGNITION ON mode.

• When using the instrument panel power outlet

You may be unable to use the USB port if a device is connected to the instrument panel power outlet at the same time.

• To avoid damaging the power outlets

Close the power outlet lid when not in use.

Foreign objects or liquids that enter the power outlet may cause a short circuit.

• To prevent the fuse from being blown

12V: Do not use an accessory that uses more than 12V/10A.

120V: Do not use a 120V AC appliance that requires more than 100W.

If a 120V AC appliance that consumes more than 100W is used, the protection circuit will cut the power supply.

• To prevent the battery from being discharged

Do not use the power outlet longer than necessary when the engine is not running.

• Appliances that may not operate properly (120V AC)

The following 120V AC appliances may not operate even if their power consumption is under 100W.

• Appliances with high initial peak wattage
• Measuring devices that process precise data
• Other appliances that require an extremely stable power supply