Toyota Land Cruiser Quiz
Brake

Removal

In this manual: Brake
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
010203040503022N·mlb·ft
Tightening torque found on this page

1. DISCONNECT FLEXIBLE HOSE

DISCONNECT FLEXIBLE HOSE

Remove the union bolt and gasket from the caliper, then disconnect the flexible hose from the caliper. Use a container to catch brake fluid as it drains out.

Torque: 30 N·m

HINT: At the time of installation, please refer to the following item.

Install the flexible hose lock securely in the lock hole in the caliper.

2. REMOVE CALIPER

(a) Hold the sliding pin and loosen the 2 installation bolts.

Torque: 26 N·m

(b) Remove the 2 installation bolts.

(c) Remove the caliper from the torque plate.

3. REMOVE 2 BRAKE PADS WITH ANTI- SQUEAL SHIMS

4. REMOVE 4 PAD SUPPORT PLATES

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.