Introduction
Check for short circuit
In this manual: Introduction
3steps
~18min
2/5difficulty
Done 0 of 3

- If the wire harness is ground shorted (fig. 5), Locate the section by conducting a resistance check with the body ground (below).
- Check the resistance with the body ground.
- Disconnect connectors a and c, and measure the resistance
Hint: Measure the resistance while lightly shaking the wire harness vertically and horizontally.
If the results match the examples above, a short circuit exists between terminal 1 of connector a and terminal 1 of connector c.
- Disconnect connector b and measure the resistance.
If the results match the examples
above, a short circuit exists between terminal 1 of connector b2 and terminal 1 of connector c.

If the results match the examples above, a short circuit exists between terminal 1 of connector b2 and terminal 1 of connector c.
Test yourself
A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?