Axle
Front axle hub bolt
In this manual: Axle
9steps
~59min
3/5difficulty
1special tools
Done 0 of 9
Components

Replacement Hint


Replacement Hint
- Use the same procedures for the rh side and lh side.
- The procedures listed below are the lh side.
- Remove front wheel
- Remove front disc brake cylinder assembly lh (see page br-40)
- Remove front disc (see page br-42)
- Remove front axle hub bolt

- Using sst, remove the hub bolt that needs to be replaced.
- Install front axle hub bolt

- Insert a new hub bolt into the bolt hole. Set a plate washer and nut on the hub bolt end.
- Using a brass bar or equivalent to hold the front axle, install the hub bolt by tightening the nut. Then remove the nut and plate washer.
- Install front disc (see page br-43)
- Install front disc brake cylinder assembly lh (see page br-46)
- Install front wheel torque: 103 n*m (1,050 kgf*cm, 76 ft.*Lbf)
Test yourself
A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?