Toyota RAV4 Quiz
Instrument panel

Installation

In this manual: Instrument panel
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
29steps
~174min
4/5difficulty
Done 0 of 29
  1. Install upper instrument panel
  2. Attach the 6 clips and 5 claws to install the instrument panel.
  3. Connect the connectors and clamps.
  4. Install the 2 bolts and 2 screws.
    Toyota RAV4. Install upper instrument panel

  1. Connect the passenger airbag connector.
  2. Install the 2 bolts to the passenger airbag.
Torque: 20 n*m (204 kgf*cm, 15 ft.*Lbf)
  1. Install front pillar garnish lh (see page ir- 57)
Toyota RAV4. Install front pillar garnish lh (see page ir- 57)

  1. Install front pillar garnish rh (see page ir- 58)
  2. Install glove compartment door assembly (see page ip-25)
  3. Install instrument panel register assembly center
    Toyota RAV4. Install instrument panel register assembly center

  1. Attach the 5 clips to install the instrument panel register.
  2. Install radio receiver
    Toyota RAV4. Install radio receiver

  1. Connect the connectors.
  2. Attach the 4 clips to install the radio receiver.
  3. Install the 4 bolts.
  4. Install no. 1 Instrument cluster finish panel center
    Toyota RAV4. Install no. 1 Instrument cluster finish panel center

  1. Connect the connector.
  2. Attach the 3 clips and 3 claws to install the cluster finish panel.
  3. Install no. 2 Instrument cluster finish panel center
    Toyota RAV4. Install no. 2 Instrument cluster finish panel center

  1. Connect the connector.
  2. Attach the 3 clips and 3 claws to install the cluster finish panel.
  3. Install combination meter assembly
    Toyota RAV4. Install combination meter assembly

  1. Connect the connector.
  2. Attach the 2 clips to install the combination meter.
  3. Install the 2 screws.
  4. Install instrument cluster finish panel sub-assembly
    Toyota RAV4. Install instrument cluster finish panel sub-assembly

  1. Attach the 4 clips and 6 claws to install the instrument cluster finish panel.
  2. Connect cable to negative battery terminal
  3. Check srs warning light
  4. Check the srs warning light (see page rs-37).

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.