Operating HomeLink

Press the appropriate HomeLink button. The HomeLink indicator light should turn on.

The status of the opening and closing of a garage door is shown by the garage door operation indicators.

Vehicles with auto anti-glare inside rear view mirror

1. 1
   Opening
2. 2
   Closing

Vehicles with Digital Rearview Mirror

1. 1
   Opening
2. 2
   Closing

This function is only available if the garage door opener motor used is a compatible device.

The indicators can operate within approximately 820 ft. (250 m) of the garage door. However, if there are obstructions between the garage door and the vehicle, such as houses and trees, feedback signals from the garage door may not be received.

To recall the previous door operation status, press and release either HomeLink buttons
and or
and
(vehicles
with auto anti-glare inside rear view mirror), and

or and
(vehicles
with Digital Rear-view Mirror) simultaneously. The last recorded status will be displayed for 3 seconds.

Erasing the entire HomeLink memory (all three codes)

Press and hold the 2 outside buttons for 10 seconds until the HomeLink indicator light changes from continuously lit (orange) to rapidly flashing (green).

If you sell your vehicle, be sure to erase the programs stored in the HomeLink memory.