Rear differential side gear shaft oil seal

1. 1
   Drain differential oil (see page df-10)
2. 2
   Remove tailpipe assembly
3. 3
   Remove the tailpipe (see page ex-2).
4. 4
   Remove center exhaust assembly
5. 5
   Remove propeller with center bearing shaft assembly (see page pr-3)
6. 6
   Remove rear differential carrier subassembly (see page df-18)
7. 7
   Remove rear differential side gear shaft oil seal

   

1. Using a sst, tap out the 2 oil seals.

1. Install rear differential side gear shaft oil seal

1. 1
   Apply a light coat of mp grease to the lip of a new rear differential side gear shaft oil seal.
2. 2
   Using sst and a hammer, tap the 2 rear differential side gear shaft oil seals into the rear differential carrier and differential side bearing retainer according to the specification.

1. 1
   Install rear differential carrier assembly (see page df-44)
2. 2
   Temporarily install propeller with center bearing shaft assembly (see page pr-5)
3. 3
   Tighten propeller with center bearing shaft assembly (see page pr-6)
4. 4
   Inspect and adjust joint angle (see page pr- 4)
5. 5
   Install center exhaust pipe assembly
6. 6
   Install the center pipe (see page ex-5).
7. 7
   Install tailpipe assembly
8. 8
   Install the tailpipe (see page ex-6).
9. 9
   Add differential oil
10. 10
    Add differential oil (see page df-3).
11. 11
    Check for differential oil leakage
12. 12
    Check for exhaust gas leakage

If gas is leaking, tighten the areas necessary to stop the leak. Replace damaged parts as necessary.