Removal

• Use the same procedures for the rh side and lh side.
• The procedures listed below are for the rh side.

1. Remove no. 2 Seat hinge cover lh

1. 1
   Fully tilt the seatback forward.
2. 2
   Attach the 2 claws and clip.

   

1. 1
   Pull the hinge cover in the direction indicated by the arrow in the illustration to detach the 2 claws. Then, remove the hinge cover.
2. 2
   Remove no. 2 Seat leg cover lh

   

1. Using a screwdriver, detach the 5 claws and remove the leg cover.

Tape the screwdriver tip before use.

3. Remove rear no. 2 Seat assembly

1. 1
   Remove the nut and rear seat cushion wire.
2. 2
   Remove the 2 bolts. Then disconnect the seat from the rear no. 2 Seat link.

   

3. Remove the 2 nuts and the rear no. 2 Seat link.

1. 1
   Pull the lock release band backward and release the 3 seat cushion locks from the lock strikers.
2. 2
   Lift up and remove the seat.

Be careful not to damage the vehicle body,

1. 1
   Remove rear no. 1 Floor mat support side plate
2. 2
   Remove no. 2 Seat leg box protector.

   

1. 1
   Using a clip remover, remove the clip.
2. 2
   Detach the clip. Then remove the protector.