Supplemental restraint system

Removal

8steps
~48min
2/5difficulty
Done 0 of 8
Caution: Be sure to read the precautionary notices concerning the srs airbag system before servicing it (see page rs-1).
  1. Disconnect cable from negative battery terminal
Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  1. Remove glove compartment door assembly (see page ip-20)
  2. Remove front passenger airbag assembly
    Toyota RAV4. Remove front passenger airbag assembly

  1. Detach the wire harness clamp from bracket.
  2. Disconnect the connector from the airbag.
Notice:

When handling the airbag connector, do not damage the airbag wire harness.

  1. Remove the 2 bolts from the reinforcement.
  2. Remove the instrument panel upper (see page ip- 6).
    Toyota RAV4. Remove front passenger airbag assembly

  1. Release the front side airbag door from the front side hook by slightly bending it and lift out the front passenger airbag rearward.
  2. Release the rear side airbag door from the other hook and remove the front passenger airbag.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.