Wireless remote control

The wireless remote control can be used to lock and unlock the vehicle.

It also opens and closes the back door.

1. 1
   Locks all the doors
2. 2
   Unlocks all the doors

Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors.

1. 1
   Sounds the alarm (press and hold)
2. 2
   Opens and closes the power back door (press and hold)*

Pressing the button while the back door is opening/closing stops the operation.

*: If equipped

1. 1
   Locks all the doors
2. 2
   Unlocks all the doors

Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors.

3. Opens and closes the power back door (press and hold)

Pressing the button while the back door is opening/closing stops the operation.

4. Sounds the alarm (Press and hold)

Doors: a buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: once; unlocked: twice) power back door (if equipped): a buzzer sounds and the emergency flashers flash twice to indicate that the back door is opening/closing.

If an attempt to lock the doors is made when a door is not fully closed, a buzzer sounds continuously for 5 seconds. Fully close the door to stop the buzzer, and lock the vehicle once more.

The back door can be opened even if it is locked. The back door and side doors will be unlocked when the power back door is opened. Lock all the doors again when you leave the vehicle. All the doors will not lock automatically after the back door has been opened and then closed.

Vehicles without a smart key system

When
is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle.

To stop the alarm, press any button on the wireless remote control.

Vehicles with a smart key system

When is
pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle.

To stop the alarm, press any button on the electronic key.

If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.

Vehicles without a smart key system

The wireless remote control function may not operate normally in the following situations.

• Near a tv tower, radio station, electric power plant, airport or other facility that generates strong radio waves
• When carrying a portable radio, cellular phone or other wireless communication device
• When multiple wireless keys are in the vicinity
• When the wireless key has come into contact with, or is covered by a metallic object
• When a wireless key (that emits radio waves) is being used nearby
• When the wireless key has been left near an electrical appliance such as a personal computer

Vehicles with a smart key system

Locking and unlocking the doors: use the mechanical key.

• Vehicles without a smart key system

If the wireless remote control function does not operate, the battery may be depleted. Replace the battery when necessary.

• Vehicles with a smart key system

The number of keys already registered to the vehicle can be confirmed. Ask your toyota dealer for details.

Settings (e.G. Wireless remote control system) can be changed.

For vehicles sold in the u.S.A., Hawaii, guam, saipan, american samoa and nato germany

Fcc id: hyq23aac

Fcc id: hyq12bdm

This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Fcc warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with industry canada licence-exempt rss standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

<Rke transmitter, tpm/rke integrated receiver> trw automotive

Automobile entry/security transmitter

Model: 226624-101, 226624-102

Fcc id: gq4-52t

Ic: 1470a-33t

Auto alarm/security system receiver

Model: 230433

Fcc id: gq4-45r

Made in u.S.A.

This device complies with part 15 of the fcc rules and with industry canada license-exempt rss standard(s). Operation is subject to the following two conditions:

1. 1
   This device may not cause harmful interference, and
2. 2
   This device must accept any interference received, including interference that may cause undesired operation of the vehicle.

Le présent appareil est conforme aux cnr d’industrie canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1. 1
   L’appareil ne doit pas produire de brouillage, et
2. 2
   L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warning: changes or modifications not expressly approved by trw automotive u.S. Llc could void the user’s authority to operate the equipment.

For vehicles sold in the u.S.A., Hawaii, guam, saipan, puerto rico, american samoa and nato germany

Fcc id: hyq23aab

Fcc id: hyq14fba

Fcc id: ni4tmlf10-13*

Fcc id: ni4tmlf10-51*

*: U.S.A. Only

This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• For vehicles sold in canada

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with industry canada licence-exempt rss standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.