Disassembly

1. REMOVE REAR NO. 2 SEAT COVER BEZEL

1. 1
   Remove the 5 screws.
2. 2
   Disengage the 5 claws and remove the rear No. 2 seat cover bezel.

2. REMOVE REAR SEAT RECLINING COVER LH

1. 1
   Remove the 2 screws.
2. 2
   Disengage the claw and remove the rear seat reclining cover LH.

3. REMOVE REAR SEAT RECLINING COVER RH

1. 1
   Remove the 2 screws.
2. 2
   Disengage the claw and remove the rear seat reclining cover RH.

4. REMOVE REAR SEAT HEADREST ASSEMBLY

5. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY LH

1. 1
   Remove the 2 pads.

   

2. 2
   Remove the 2 clips.

   

3. 3
   Remove the 23 hog rings and disconnect the No. 2 seatback cover sub-assembly with pad.
4. 4
   Turn back the No. 2 seatback cover sub-assembly.
5. 5
   Disengage the 4 claws and remove both rear No. 2 seat headrest support assemblies LH.

6. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY RH

HINT: Use the same procedure described for the LH side.

7. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY WITH PAD

1. 1
   Disconnect the connectors.
2. 2
   Disengage the 3 clamps and remove the No. 2 seatback cover sub-assembly with pad.

8. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY

1. Remove the 10 hog rings and No. 2 seatback cover sub-assembly.

9. REMOVE NO. 2 SEATBACK PAD

10. REMOVE FOLD SEAT CONTROL ECU

1. Remove the 2 nuts and fold seat control ECU.

11. REMOVE NO. 2 SEATBACK FRAME SUB-ASSEMBLY

1. Remove the 4 bolts and No. 2 seatback frame subassembly.

12. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL

1. Disengage the 4 claws and remove the reclining remote control lever bezel.

13. REMOVE REAR POWER SEAT SWITCH

1. 1
   Remove the 2 screws.
2. 2
   Disconnect the connector and remove the rear power seat switch.

14. REMOVE REAR NO. 2 SEAT LAP BELT ASSEMBLY CENTER WITH INNER

1. Remove the bolt, washer and rear No. 2 seat lap belt assembly center with inner.

15. REMOVE REAR NO. 2 SEAT BELT ASSEMBLY INNER

1. 1
   Remove the 2 hog rings.

   

2. 2
   Remove the bolt and rear No. 2 seat belt assembly inner.

16. REMOVE REAR SEAT BELT ASSEMBLY INNER

1. Remove the bolt and rear seat belt assembly inner.

17. REMOVE REAR SEAT COVER

1. 1
   Remove the 2 screws.
2. 2
   Disengage the 2 claws and remove the rear seat cover.

18. REMOVE NO. 2 SEAT CUSHION COVER SUBASSEMBLY WITH PAD

1. 1
   Raise the 5 rear seat cushion edge protectors.
2. 2
   Disengage the hooks and remove the No. 2 seat cushion cover sub-assembly with pad.

19. REMOVE NO. 2 SEAT CUSHION COVER SUBASSEMBLY

1. Remove the 10 hog rings and No. 2 seat cushion cover sub-assembly.

20. REMOVE NO. 2 SEAT CUSHION PAD

21. REMOVE REAR SEAT WIRE

1. 1
   Disconnect the connector.
2. 2
   Disengage the 3 clamps and remove the rear seat wire.

22. REMOVE NO. 2 SEAT CUSHION STOPPER

1. Remove the 2 bolts and No. 2 seat cushion stopper.

HINT: Use the same procedure to remove the other stopper.

23. REMOVE NO. 2 SEAT CUSHION SPRING ASSEMBLY

1. Remove the No. 2 seat cushion spring assembly.

24. REMOVE NO. 2 SEAT CUSHION FRAME SUBASSEMBLY

25. REMOVE NO. 2 SEAT LEG SUB-ASSEMBLY

1. 1
   Disengage the 3 clamps.
2. 2
   Remove the 3 bolts, 2 nuts and No. 2 seat leg subassembly.