Toyota Sienna Quiz
Seat

Removal

In this manual: Seat
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
7steps
~42min
2/5difficulty
Done 0 of 7

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE REAR NO. 2 SEAT LEG SIDE GARNISH SUB-ASSEMBLY

REMOVE REAR NO. 2 SEAT LEG SIDE GARNISH SUB-ASSEMBLY
  1. Disengage the 9 clips and remove the rear No. 2 seat leg side garnish sub-assembly.
  2. Remove the 9 clips from the rear No. 2 seat leg side garnish sub-assembly.

3. REMOVE REAR SEAT LEG SIDE GARNISH SUBASSEMBLY

REMOVE REAR SEAT LEG SIDE GARNISH SUBASSEMBLY
  1. Disengage the 4 clips and remove the rear seat leg side garnish sub-assembly.
  2. Remove the 4 clips from the rear seat leg side garnish sub-assembly.

4. REMOVE NO. 2 SEAT HINGE COVER

REMOVE NO. 2 SEAT HINGE COVER
  1. Disengage the 8 claws and remove both No. 2 seat hinge covers.

5. REMOVE REAR NO. 2 SEAT ASSEMBLY

REMOVE REAR NO. 2 SEAT ASSEMBLY
  1. Disconnect the connector.
  2. Remove the 8 bolts.
    REMOVE REAR NO. 2 SEAT ASSEMBLY
  3. Pull the lever under the No. 2 seat cushion subassembly and remove the rear No. 2 seat assembly.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.