Engine hood / door
How to proceed with troubleshooting
In this manual: Engine hood / door
12steps
~72min
3/5difficulty
Done 0 of 12
HINT: Troubleshoot in accordance with the procedures on the following pages.
1 VEHICLE BROUGHT TO WORKSHOP
2 CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK
3 INSPECT COMMUNICATION FUNCTION OF LARGE-SCALE MULTIPLEX COMMUNICATION SYSTEM (BEAN)
- Use the intelligent tester to check for normal function of the multiplex communication system.
- (ECU unconnected, communication line malfunctioning) Without code outputs, proceed to A.
- (ECU unconnected, communication line malfunctioning) With code outputs, proceed to B.
4 DTC CHECK
- Check for a diagnostic trouble code.
- Without code outputs, proceed to A.
- With code outputs, proceed to B.
5 PROBLEM SYMPTOMS TABLE
- When problem is not listed on problem symptoms table, proceed to A.
- When problem is listed on problem symptoms table, proceed to B.
6 PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM
- Data List / Active Test.
- Operation check.
- Inspection.
- Terminals of ECU
7 ADJUST, REPAIR OR REPLACE
8 RESET POWER SLIDE DOOR SYSTEM
9 CONFIRMATION TEST
END
Test yourself
A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?