Toyota Sienna Quiz
Brake control

Inspection

In this manual: Brake control
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. INSPECT FRONT SPEED SENSOR

(a) Make sure that there is no looseness at the connector lock part and connecting part of the connector.

(b) Disconnect the speed sensor connector.

(c) Measure the resistance between terminals 1 and 2 of the speed sensor connector.

INSPECT FRONT SPEED SENSOR

OK: Resistance: 0.92 to 1.22 kΩ

(d) Measure the resistance between terminals 1 and 2 of the speed sensor connector and body ground.

OK: Resistance: 1MΩ or higher

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.