Toyota Sienna Quiz
Brake control

Removal

In this manual: Brake control
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

HINT: Remove the RH side by same procedures with LH side.

1. REMOVE FRONT WHEEL

2. REMOVE FRONT FENDER LINER LH

3. REMOVE FRONT SPEED SENSOR LH

REMOVE FRONT SPEED SENSOR LH

(a) Disconnect the speed sensor connector.

(b) Remove the sensor harness and clamp from the body.

REMOVE FRONT SPEED SENSOR LH

(c) Remove the 2 clamp bolts holding the sensor harness and clamp from the body and shock absorber.

REMOVE FRONT SPEED SENSOR LH

(d) Remove the bolt and speed sensor front LH.

NOTICE: Keep the tip of the speed sensor front LH.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.