Wiper and washer
Inspection
In this manual: Wiper and washer
8steps
~53min
3/5difficulty
1special tools
Done 0 of 8
1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY

- LO Operation Check
- Connect the battery (+) to the terminal 1 (+1) of the connector, the battery (-) to the terminal 5 (E) of the connector, and check that the motor operates at low speed (LO).
- HI Operation Check
- Connect the battery (+) to the terminal 4 (+2) of the connector, the battery (-) to the terminal 5 (E) of the connector, and check that the motor operates at high speed (HI).
- Automatic Stop Operation Check
- Connect the battery (+) to the terminal 1 (+1) of the connector, the battery (-) to the terminal 5 (E) of the connector. With the motor being rotated at low speed (LO), disconnect terminal 1 (+1) to stop the wiper motor operation at any position except the automatic stop position.
- Using SST, connect the terminal 1 (+1) and 3 (S), and the battery (+) to the terminal 2 (B) to restart the motor operation at low speed (LO).
SST 09843-18040
- Check the automatic stop position.
Standard: See the illustration.

Test yourself
A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?