Toyota Sienna Quiz
Brake control

Installation

In this manual: Brake control
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read
1special tools

1. INSTALL BRAKE MASTER CYLINDER

INSTALL BRAKE MASTER CYLINDER

(a) Install the brake master cylinder with the 2 nuts.

Torque: 13 N*m (130 kgf*cm, 9 ft.*lbf) (b) Slide the clip and connect the brake master cylinder reservoir hose.

INSTALL BRAKE MASTER CYLINDER

(c) Using SST, connect the 2 brake tube to the brake master cylinder.

SST 09023-00101 Torque: 15 N*m (155 kgf*cm, 11 ft.*lbf)

2. INSTALL AIR CLEANER ASSEMBLY WITH HOSE

3. FILL RESERVOIR WITH BRAKE FLUID (See page BR- 3)

4. BLEED BRAKE MASTER CYLINDER (See page BR-3)

5. BLEED BRAKE LINE (See page BR-4)

6. BLEED BRAKE ACTUATOR (w/ VSC) (See page BR- 4)

7. CHECK BRAKE FLUID LEVEL IN RESERVOIR (See page BR-7)

8. CHECK BRAKE FLUID LEAKAGE

9. INSTALL COWL TOP PANEL SUB-ASSEMBLY OUTER FRONT

10. INSPECT BRAKE PEDAL HEIGHT (See page BR-9)

11. CHECK BRAKE ACTUATOR WITH INTELLIGENT TESTER

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.