Toyota Sienna Quiz
Parking brake

Installation

In this manual: Parking brake
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY

INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY

(a) Install the parking brake control pedal assembly with a bolt and the 2 nuts.

Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf) (b) Connect the parking brake switch connector.

(c) Connect the instrument panel junction block assembly w/ wiring harness connector with the 4 nuts.

Torque: 7.3 N*m (74 kgf*cm, 65 in.*lbf)

2. INSTALL REAR FLOOR SEAT LOCK COVER

3. INSTALL REAR FLOOR SEAT LOCK COVER

4. INSTALL REAR SEAT NO.1 ASSEMBLY

HINT:

  • Captain Seat Type (See page SE-75)
  • Center Seat Type (See page SE-82)

5. INSTALL FRONT SEAT ASSEMBLY LH

HINT:

  • Manual Seat Type (See page SE-55)
  • Power Seat Type (See page SE-66)
  • Fold Flat Type (See page SE-45)

6. INSPECT PARKING BRAKE PEDAL TRAVEL (See page PB-1)

7. ADJUST PARKING BRAKE PEDAL TRAVEL (See page PB-1)

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.