Parking brake

Reassembly

~1min read

1. INSTALL PARKING BRAKE SWITCH ASSEMBLY

(a) Install the parking brake switch to the parking brake pedal with the screw.

2. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.1

(a) Connect the parking brake cable No. 1 to the parking brake cable equalizer.

(b) Install the parking brake cable No. 1 with the 6 bolts.

(Except 7 Passenger Type) (c) Install the parking brake cable No. 1 with the 7 bolts.

(7 Passenger Type)

 INSTALL PARKING BRAKE CABLE ASSEMBLY NO.1

Torque: Bolt (A) 5.6 N*m (57 kgf*cm, 50 in.*lbf) Bolt (B) 8 N*m (82 kgf*cm, 71 in.*lbf)

3. INSTALL PARKING BRAKE PEDAL BRACKET PROTECTOR

 INSTALL PARKING BRAKE PEDAL BRACKET PROTECTOR

(a) Fit the convex part on a new parking brake pedal bracket protector into the concave part on the parking brake control pedal and turn the parking brake pedal bracket protector counterclockwise.

INSTALL PARKING BRAKE PEDAL BRACKET PROTECTOR

(b) Engaging the 2 claws, install the parking brake pedal bracket to the parking brake control pedal.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.