Toyota Sienna Quiz
Seat

Installation

In this manual: Seat
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
7steps
~42min
2/5difficulty
Done 0 of 7

1. INSTALL REAR NO. 2 SEAT ASSEMBLY

INSTALL REAR NO. 2 SEAT ASSEMBLY
  1. Lock the seat leg rear to the floor striker.
  2. Lock the seat leg front to the floor striker.
  3. Install the rear No. 2 seat assembly with the 6 bolts.

    Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf)

NOTICE: Tighten the bolts in the order shown in the illustration.

  1. Connect the connector.

2. INSTALL NO. 2 SEAT HINGE COVER

3. INSTALL REAR SEAT LEG SIDE GARNISH SUBASSEMBLY

  1. Install 4 new clips to the rear seat leg side garnish sub-assembly.
  2. Engage the 4 clips and install the rear seat leg side garnish sub-assembly.

4. INSTALL REAR NO. 2 SEAT LEG SIDE GARNISH SUB-ASSEMBLY

INSTALL REAR NO. 2 SEAT LEG SIDE GARNISH SUB-ASSEMBLY
  1. Install 9 new clips to the rear No. 2 seat leg side garnish sub-assembly.
  2. Engage the 4 clips and install the rear No. 2 seat leg side garnish sub-assembly.

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. CHECK POWER REAR NO. 2 SEAT WITH STOWING FUNCTION

7. PERFORM INITIALIZATION

Some systems need initialization after reconnecting the cable to the negative battery terminal.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.