Toyota Sienna Quiz
Exterior

Installation

In this manual: Exterior
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
3steps
~18min
2/5difficulty
Done 0 of 3

1. INSTALL FRONT BUMPER ASSEMBLY

INSTALL FRONT BUMPER ASSEMBLY
  1. Push the front bumper onto the front of the vehicle and engage the claws on the left and right sides of the front bumper to install it as shown in the illustration.

HINT:

  • Apply protective tape to the bottom part of the front fender to prevent it from being damaged.
  • Connect the connectors if necessary.
INSTALL FRONT BUMPER ASSEMBLY
  1. Install the 5 clips.
    INSTALL FRONT BUMPER ASSEMBLY
  2. Connect the engine under cover to the front bumper assembly with the 8 screws.

    Torque: 7.0 N*m (71 kgf*cm, 62.0 in.*lbf)

    INSTALL FRONT BUMPER ASSEMBLY
  3. Connect the fender liner to the front bumper assembly with the 4 screws.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. VEHICLE PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) (See page LI-82)

4. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) (See page LI-83)

5. FOG LIGHT AIMING INSPECTION (w/ Fog Light) (See page LI-84)

6. FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light)

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.