Toyota Sienna Quiz
Exterior

Removal

In this manual: Exterior
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
4steps
~24min
2/5difficulty
Done 0 of 4

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT BUMPER ASSEMBLY

REMOVE FRONT BUMPER ASSEMBLY
  1. Remove the 4 screws and separate the fender liner from the front bumper assembly.
    REMOVE FRONT BUMPER ASSEMBLY
  2. Remove the 8 screws and separate the engine under cover from the front bumper assembly.
    REMOVE FRONT BUMPER ASSEMBLY
  3. Remove the 5 clips.
    REMOVE FRONT BUMPER ASSEMBLY
  4. Disengage the claws on the left and right sides of the front bumper and pull the front bumper toward the front of the vehicle as shown in the illustration.

HINT:

  • Apply protective tape to the bottom part of the front fender to prevent it from being damaged.
  • Disconnect the connectors if necessary.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.