Power Windows do not Operate at All

DESCRIPTION

If all of the door windows do not operate, no power may be supplied to the power window master switch or the power window master switch itself may have a malfunction.

WIRING DIAGRAM

INSPECTION PROCEDURE

1 INSPECT FUSE (PWR, ECU-IG, AM1)

1. 1
   Remove the fuses from the driver side J/B.
2. 2
   Check the resistance.

Standard resistance: Below 1 Ω

2 INSPECT RELAY (IG1, PWR)

1. 1
   Remove the relay from the driver side J/B.
2. 2
   Check the resistance of the relay.

Standard resistance

3 CHECK WIRE HARNESS (TO DRIVER SIDE JUNCTION BLOCK ASSEMBLY)

1. 1
   Disconnect the 1A, 1H and 1L J/B connectors.
2. 2
   Check the voltage and resistance between each terminal of the wire harness side connector and the body ground.

Standard voltage

Standard resistance

4 CHECK WIRE HARNESS (TO POWER WINDOW REGULATOR MASTER SWITCH)

1. 1
   Disconnect the D9 master switch connector.
2. 2
   Check the voltage or resistance between each terminal of the wire harness side connector and the body ground.

Standard voltage

Standard resistance

5 CHECK WIRE HARNESS (DRIVER SIDE JUNCTION BLOCK - POWER WINDOW MASTER SWITCH)

1. 1
   Disconnect the 1L and 1K J/B connectors.
2. 2
   Disconnect the D9 master switch connector.
3. 3
   Check the resistance between the wire harness side connectors.

Standard resistance

REPLACE DRIVER SIDE JUNCTION BLOCK ASSEMBLY