Toyota Sienna Quiz
Engine

Removal

In this manual: Engine
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read

1. REMOVE NO. 1 ENGINE UNDER COVER (See page EM-26) 2. REMOVE EXHAUST PIPE ASSEMBLY for 2WD:(See page EX-2) for 4WD:(See page EX-8) 3. DRAIN ENGINE COOLANT (See page CO-6) 4. DRAIN ENGINE OIL (See page LU-4) 5. REMOVE NO. 2 MANIFOLD STAY (See page EM-39) 6. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR (See page EM-40) 7. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH (See page EM-40) 8. REMOVE ENGINE OIL COOLER

REMOVE ENGINE OIL COOLER

(a) Remove the bolt, 2 clamps, and 4 clips and disconnect the 2 water by-pass hoses.

REMOVE ENGINE OIL COOLER

(b) Remove the oil cooler union bolt, oil cooler assembly, and O-ring.

INSPECTION

1. INSPECT ENGINE OIL COOLER

INSPECT ENGINE OIL COOLER

(a) Check the engine oil cooler for damage or clogging.

If necessary, replace the oil cooler.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.