Toyota Sienna Quiz
Door lock

Terminals of ECU

In this manual: Door lock
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
4steps
~24min
2/5difficulty
Done 0 of 4

1. CHECK DRIVER SIDE J/B ASSEMBLY (MULTIPLEX NETWORK BODY ECU)

  1. Disconnect the B6, 1C, 1K and 1L J/B connectors.
    CHECK DRIVER SIDE J/B ASSEMBLY
  2. Measure the voltage and resistance according to the value(s) in the table below.
    CHECK DRIVER SIDE J/B ASSEMBLY

HINT: If the result is not as specified, there may be a malfunction on the wire harness side.

  1. Reconnect the 1C, 1K, 1L and B6 connectors.
  2. Measure the voltage according to the value(s) in the table below.

Standard voltage

Standard voltage

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.