Clutch Start Cancel Switch
1. INSPECT CLUTCH START CANCEL SWITCH ASSEMBLY
(a) Using an ohmmeter, check that there is resistance between terminals 2 and 4. Standard: 10 kΩ or higher If the result is not as specified, replace the clutch start cancel switch. |
 |
(b) Connect the positive (+) lead from the battery to terminal 3 and connect negative (-) lead to terminal 1. |
 |
(c) Using an ohmmeter, check that there is resistance between terminals 2 and 4.
Standard:
10 kΩ or higher
If the result is not as specified, replace the clutch start cancel switch.
(d) Check that the indicator light comes on and there is resistance between terminals 2 and 4 when the switch is pressed. Standard: Below 1 Ω If the result is not as specified, replace the clutch start cancel switch. |
 |
(e) Using an ohmmeter, check that there is resistance between terminals 2 and 4 when the battery lead is disconnected. Standard: 10 kΩ or higher If the result is not as specified, replace the clutch start cancel switch. |
 |
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.