Cruise Control
Customize Parameters
In this manual: Cruise Control
~1min read
CUSTOMIZE PARAMETERS
CUSTOMIZE LANE DEPARTURE ALERT SYSTEM
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
(a) Customizing with the Multi-information display
(1) Turn the ignition switch to ON.
(2) Enter the following menus: Settings Tab / Settings / Lane Departure Alert Setup
(3) Select the setting by referring to the table below.
(4) Change the settings of the lane departure alert using the steering pad switch assembly.
Lane Departure AlertItem | Content | Setting | Default |
|---|---|---|---|
LDA Sensitivity |
Timing of lane departure warning |
|
Standard |
Sway Warning |
Vehicle sway warning function |
ON/OFF |
ON |
Sway Warning Sensitivity |
Vehicle sway detection sensitivity |
|
Normal |
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?