Brake
Disassembly
In this manual: Brake
~1min read
DISASSEMBLY PROCEDURE
1. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
2. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER
3. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
(a) Fix the brake master cylinder in a vise between aluminum plates.
NOTICE:
Do not overtighten the vise.
(b) Using a pin punch and a hammer, tap out the straight pin and remove the brake master cylinder reservoir. |
![]() |
4. REMOVE MASTER CYLINDER RESERVOIR GROMMET
(a) Remove the 2 grommets from the master cylinder reservoir.
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
