Brake
Reassembly
In this manual: Brake
~1min read
REASSEMBLY PROCEDURE
1. INSTALL MASTER CYLINDER RESERVOIR GROMMET
(a) Apply lithium soap base glycol grease to 2 new grommets.
(b) Install the 2 grommets onto the brake master cylinder reservoir.
2. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
(a) Install the brake master cylinder reservoir to the master cylinder body.
(b) Fix the brake master cylinder in a vise between aluminum plates.
NOTICE:
Do not overtighten the vise.
(c) Using a pin punch and a hammer, tap in the straight pin. |
![]() |
3. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER
4. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
.png)