Engine Immobiliser
Engine Immobiliser System Incorrect Assembly (B279C95)
In this manual: Engine Immobiliser
~1min read
DESCRIPTION
Related Data List and Active Test
PROCEDURE
This code is stored when an ECM that is incompatible with the engine immobiliser system is installed to the vehicle.
DTC Code | DTC Detection Condition | Trouble Area | DTC Output Confirmation Operation |
|---|---|---|---|
B279C95 |
An ECM that is incompatible with the engine immobiliser system is installed (1 trip detection logic*). |
ECM |
Check for DTCs. |
- *: Only output while a malfunction is present.
Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
|---|---|
Engine cannot be started |
- |
DTC Code | Data List and Active Test |
|---|---|
B279C95 |
- |
CLEAR DTC
(a) Clear the DTCs (See page
).
|
CHECK FOR DTC
(a) Check for DTCs (See page
).
OK:
DTC B279C95 is not output.
| OK | ![]() |
USE SIMULATION METHOD TO CHECK |
| NG | ![]() |
REPLACE ECM |
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
.gif)
.gif)