Door Lock

How To Proceed With Troubleshooting

~1min read
CAUTION / NOTICE / HINT

HINT:

  • Use these procedures to troubleshoot the key reminder warning system.
  • *: Use the Techstream.
PROCEDURE
  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. INSPECT BATTERY VOLTAGE

(a) Check the battery voltage.

Standard voltage:

11 to 14 V

HINT:

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT
  1. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Use the Techstream to check if the CAN communication system is functioning normally.

Click here

Result

Proceed to

DTC is not output

A

DTC is output

B

B

GO TO CAN COMMUNICATION SYSTEM

A
  1. PROBLEM SYMPTOMS TABLE

Result

Proceed to

Fault is not listed on Problem Symptoms Table

A

Fault is listed on Problem Symptoms Table

B

B

GO TO STEP 6

A
  1. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Terminals of ECU.

Click here (b) Data List / Active Test.

(b) Data List / Active Test.

Click here

NEXT
  1. REPAIR OR REPLACE

NEXT
  1. CONFIRMATION TEST

NEXT

END

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.