Installation

1. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Install the transmission control cable assembly from outside the vehicle body and attach the 3 claws of the cable retainer.

(b) Install the 2 nuts.

Torque:

5,5 N·m {56 kgf·cm, 49 in·lbf}

(c) Connect the transmission control cable support to the vehicle body with the nut.

Torque:

5,5 N·m {56 kgf·cm, 49 in·lbf}

(d) Turn the transmission control shaft lever LH clockwise until it stops, and then return the transmission control shaft lever LH counterclockwise 2 notches to N.

(e) Connect the transmission control cable assembly to the transmission control cable bracket with a new clip, and then connect the cable end to the transmission control shaft lever LH with the nut.

Torque:

14 N·m {143 kgf·cm, 10 ft·lbf}

2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

3. INSPECT SHIFT LEVER POSITION

4. REMOVE FRONT CONSOLE BOX

(See page )